Apply laptop stuff

kmonad/.config/kmonad/kmonad.kbd

@@ -0,0 +1,72 @@
+#|
+(deflayer name
+ _    _    _    _    _    _    _    _    _    _    _    _    _
+ _    _    _    _    _    _    _    _    _    _    _    _    _    _     _    _    _
+ _    _    _    _    _    _    _    _    _    _    _    _    _    _     _    _    _
+ _    _    _    _    _    _    _    _    _    _    _    _    _
+ _    _    _    _    _    _    _    _    _    _    _    _    _               _
+ _    _    _              _                   _    _    _    _          _    _    _
+ )
+
+-------------------------------------------------------------------------- |#
+
+
+(defcfg
+ input (device-file "/dev/input/by-path/platform-i8042-serio-0-event-kbd")
+ output (uinput-sink "KMonad")
+ fallthrough true
+ allow-cmd true
+ )
+
+(defsrc
+ esc  f1   f2   f3   f4   f5   f6   f7   f8   f9   f10  f11  f12        ssrq slck pause
+ grv  1    2    3    4    5    6    7    8    9    0    -    =    bspc  ins  home pgup
+ tab  q    w    e    r    t    y    u    i    o    p    [    ]    ret   del  end  pgdn
+ caps a    s    d    f    g    h    j    k    l    ;    '    \
+ lsft 102d z    x    c    v    b    n    m    ,    .    /    rsft            up
+ lctl lmet lalt           spc                 ralt rctl cmp  rctl       left down rght
+ )
+
+(deflayer base
+ esc    f1     f2     f3     f4     f5     f6     f7     f8     f9     f10    f11   f12            ssrq   slck   pause
+ grv    1      2      3      4      5      6      7      8      9      0      -     =      bspc    ins    home   pgup
+ @tab   q      w      e      r      t      y      u      i      o      p      [     +      ret     del    end    pgdn
+ @cps   a      s      d      f      g      h      j      k      l      ;      '     \
+ lsft   102d   z      x      c      v      b      n      m      ,      .      /     rsft                  up
+ lctl   lmet   lalt                 spc                         ralt   ralt   cmp   rctl           left   down   rght
+ )
+
+(defalias
+  cps   (tap-hold-next-release 200 esc (layer-toggle symbols))
+  tab   (tap-hold-next-release 200 tab (layer-toggle umls))
+  s-sft (tap-hold-next-release 150 s lsft)
+  l-sft (tap-hold-next-release 150 l lsft)
+
+  uml-a #(ralt " a)
+  uml-o #(ralt " o)
+  uml-u #(ralt " u)
+  uml-s #(ralt s s)
+  excl (around lsft 1)
+)
+
+
+
+
+
+(deflayer symbols
+_      _      _      _      _      _      _      _      _      _      _      _      _              _      _      _
+_      _      _      _      _      _      _      _      _      _      _      _      _      _       _      _      _
+_      _      @excl  "      /      \\     _      {      [      ]      }      _      *      _       _      _      _
+_      home   $      \(     \)     end    left   down   up     right  &      %      _
+_      _      |      delete ?      ~      _      =      #      bspc   _      #(~ /) _                     _
+_      _      _                    _                           _      _      _      _              _      _      _
+)
+
+(deflayer umls
+ _      _      _      _      _      _      _      _      _      _      _      _      _          _    _    _
+ _      _      _      _      _      _      _      _      _      _      _      _      _    _     _    _    _
+ _      _      _      _      _      _      _      @uml-u _      @uml-o _      _      _    _     _    _    _
+ _      @uml-a @uml-s _      _      _      _      _      _      _      _      _      _
+ _      _      _      _      _      _      _      _      _      _      _      _      _               _
+ _      _      _                    _                           _      _      _      _          _    _    _
+ )

scripts/scripts/battery_indicator.sh

@@ -0,0 +1,8 @@
+#!/usr/bin/env bash
+
+#output="$(upower -i /org/freedesktop/UPower/devices/battery_BAT1)"
+percentage="$(cat /sys/class/power_supply/BAT1/capacity)"
+status="$(cat /sys/class/power_supply/BAT1/status)"
+
+
+echo "${percentage}%"

sway/.config/sway/config

@@ -0,0 +1,247 @@
+
+# Default config for sway
+#
+# Copy this to ~/.config/sway/config and edit it to your liking.
+#
+# Read `man 5 sway` for a complete reference.
+
+### Variables
+#
+# Logo key. Use Mod1 for Alt.
+set $mod Mod4
+# Home row direction keys, like vim
+set $left h
+set $down j
+set $up k
+set $right l
+# Your preferred terminal emulator
+set $term foot
+# Your preferred application launcher
+# Note: pass the final command to swaymsg so that the resulting window can be opened
+# on the original workspace that the command was run on.
+set $menu dmenu_path | dmenu | xargs swaymsg exec --
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in /usr/share/backgrounds/sway/)
+output * bg /home/leon/Pictures/wallpapers/0126.jpg fill
+#
+# Example configuration:
+#
+#   output HDMI-A-1 resolution 1920x1080 position 1920,0
+#
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+
+# autostart
+exec swayidle -w \
+         timeout 300 'swaylock -f -c 000000' \
+         timeout 600 'swaymsg "output * dpms off"' resume 'swaymsg "output * dpms on"' \
+         before-sleep 'swaylock -f -c 000000'
+
+exec mako
+exec libinput-gestures-setup start
+
+
+
+
+# visuals 
+gaps inner 10
+default_border pixel 1
+
+
+
+client.focused "#ebdbb2" "#ebdbb2" "#1d2021"
+client.unfocused "#1d2021" "#1d2021" "#1d2021"
+
+
+
+
+
+
+
+
+
+### Input configuration
+#
+# Example configuration:
+#
+input "1267:12370:ELAN0651:00_04F3:3052_Touchpad" {
+    dwt enabled
+    tap enabled
+    natural_scroll enabled
+    middle_emulation enabled
+}
+
+input "type:keyboard" {
+    xkb_options compose:ralt
+}
+
+
+
+#
+# You can get the names of your inputs by running: swaymsg -t get_inputs
+# Read `man 5 sway-input` for more information about this section.
+
+### Key bindings
+#
+# Basics:
+#
+    # Start a terminal
+    bindsym $mod+Return exec $term
+
+    # Kill focused window
+    bindsym $mod+Shift+q kill
+
+    # Drag floating windows by holding down $mod and left mouse button.
+    # Resize them with right mouse button + $mod.
+    # Despite the name, also works for non-floating windows.
+    # Change normal to inverse to use left mouse button for resizing and right
+    # mouse button for dragging.
+    floating_modifier $mod normal
+
+    # Reload the configuration file
+    bindsym $mod+Shift+c reload
+
+    # Exit sway (logs you out of your Wayland session)
+    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'
+
+    bindsym $mod+Shift+p exec ~/.config/rofi/bin/launcher_ribbon
+#
+# Moving around:
+#
+    # Move your focus around
+    bindsym $mod+$left focus left
+    bindsym $mod+$down focus down
+    bindsym $mod+$up focus up
+    bindsym $mod+$right focus right
+    # Or use $mod+[up|down|left|right]
+    bindsym $mod+Left focus left
+    bindsym $mod+Down focus down
+    bindsym $mod+Up focus up
+    bindsym $mod+Right focus right
+
+    # Move the focused window with the same, but add Shift
+    bindsym $mod+Shift+$left move left
+    bindsym $mod+Shift+$down move down
+    bindsym $mod+Shift+$up move up
+    bindsym $mod+Shift+$right move right
+    # Ditto, with arrow keys
+    bindsym $mod+Shift+Left move left
+    bindsym $mod+Shift+Down move down
+    bindsym $mod+Shift+Up move up
+    bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+    # Switch to workspace
+    bindsym $mod+1 workspace number 1
+    bindsym $mod+2 workspace number 2
+    bindsym $mod+3 workspace number 3
+    bindsym $mod+4 workspace number 4
+    bindsym $mod+5 workspace number 5
+    bindsym $mod+6 workspace number 6
+    bindsym $mod+7 workspace number 7
+    bindsym $mod+8 workspace number 8
+    bindsym $mod+9 workspace number 9
+    bindsym $mod+0 workspace number 10
+    # Move focused container to workspace
+    bindsym $mod+Shift+1 move container to workspace number 1
+    bindsym $mod+Shift+2 move container to workspace number 2
+    bindsym $mod+Shift+3 move container to workspace number 3
+    bindsym $mod+Shift+4 move container to workspace number 4
+    bindsym $mod+Shift+5 move container to workspace number 5
+    bindsym $mod+Shift+6 move container to workspace number 6
+    bindsym $mod+Shift+7 move container to workspace number 7
+    bindsym $mod+Shift+8 move container to workspace number 8
+    bindsym $mod+Shift+9 move container to workspace number 9
+    bindsym $mod+Shift+0 move container to workspace number 10
+    # Note: workspaces can have any name you want, not just numbers.
+    # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+    # You can "split" the current object of your focus with
+    # $mod+b or $mod+v, for horizontal and vertical splits
+    # respectively.
+    bindsym $mod+b splith
+    bindsym $mod+v splitv
+
+    # Switch the current container between different layout styles
+    bindsym $mod+s layout stacking
+    bindsym $mod+w layout tabbed
+    bindsym $mod+e layout toggle split
+
+    # Make the current focus fullscreen
+    bindsym $mod+f fullscreen
+
+    # Toggle the current focus between tiling and floating mode
+    bindsym $mod+Shift+space floating toggle
+
+    # Swap focus between the tiling area and the floating area
+    bindsym $mod+space focus mode_toggle
+
+    # Move focus to the parent container
+    bindsym $mod+a focus parent
+
+
+
+bindsym --locked XF86MonBrightnessUp   exec brightnessctl -e set 50+
+bindsym --locked XF86MonBrightnessDown exec brightnessctl -e set 50-
+bindsym --locked XF86AudioRaiseVolume  exec pamixer -i 5
+bindsym --locked XF86AudioLowerVolume  exec pamixer -d 5
+
+bindsym $mod+Shift+S exec grimshot copy area
+bindsym $mod+Shift+b exec google-chrome-stable
+
+
+#
+# Scratchpad:
+#
+    # Sway has a "scratchpad", which is a bag of holding for windows.
+    # You can send windows there and get them back later.
+
+    # Move the currently focused window to the scratchpad
+    bindsym $mod+Shift+minus move scratchpad
+
+    # Show the next scratchpad window or hide the focused scratchpad window.
+    # If there are multiple scratchpad windows, this command cycles through them.
+    bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+    bindsym $left resize shrink width 10px
+    bindsym $down resize grow height 10px
+    bindsym $up resize shrink height 10px
+    bindsym $right resize grow width 10px
+
+    # Return to default mode
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+bindsym $mod+r mode "resize"
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+    position bottom
+
+    # When the status_command prints a new line to stdout, swaybar updates.
+    # The default just shows the current date and time.
+    status_command while echo "$(/home/leon/scripts/battery_indicator.sh) // $(date +'%Y-%m-%d %l:%M:%S %p')"; do sleep 1; done
+    font "cozette 8"
+    #font "Terminus (TTF)"
+    height 20
+
+    colors {
+        statusline #ebdbb2
+        background #1d202100
+        inactive_workspace #1d202100 #1d202100 #ebdbb2
+        focused_workspace  #282828   #83c07c   #282828
+        active_workspace   #28282800 #83c07c   #282828
+    }
+}
+
+include /etc/sway/config.d/*

zsh/.config/zsh/.zshrc

@@ -0,0 +1,42 @@
+source ~/.zplug/init.zsh
+
+zplug 'zplug/zplug', hook-build:'zplug --self-manage'
+zplug "plugins/git", from:oh-my-zsh
+zplug "zsh-users/zsh-completions"
+zplug "Aloxaf/fzf-tab", defer:2
+zplug "zsh-users/zsh-history-substring-search", defer:2
+zplug "zdharma/fast-syntax-highlighting", defer:2
+
+if ! zplug check --verbose; then
+    printf "Install? [y/N]: "
+    if read -q; then
+        echo; zplug install
+    fi
+fi
+zplug load
+
+eval "$(zoxide init zsh)"
+
+source "$ZDOTDIR/fzf-tab.zsh"
+
+
+setopt nobeep
+setopt HIST_IGNORE_ALL_DUPS
+autoload -Uz colors && colors
+autoload -Uz promptinit && promptinit
+
+my-backward-delete-word() {
+    local WORDCHARS=${WORDCHARS/\//}
+    zle backward-delete-word
+}
+zle -N my-backward-delete-word
+bindkey '^W' my-backward-delete-word
+bindkey '^H' backward-delete-word
+bindkey "^[[H" beginning-of-line
+bindkey "^[[F" end-of-line
+
+
+alias ls="exa --icons"
+
+
+source "$ZDOTDIR/prompt.zsh"

zsh/.config/zsh/fzf-tab.zsh

@@ -0,0 +1,20 @@
+#!/usr/bin/env zsh
+
+FZF_TAB_COMMAND=(
+      fzf
+      --ansi
+      --expect='$continuous_trigger' # For continuous completion
+      '--color=hl:$(( $#headers == 0 ? 108 : 255 ))'
+      --nth=2,3 --delimiter='\x00'  # Don't search prefix
+      --layout=reverse --height="''${FZF_TMUX_HEIGHT:=50%}"
+      --tiebreak=begin -m --bind=tab:down,btab:up,change:top,ctrl-space:toggle --cycle
+      '--query=$query'   # $query will be expanded to query string at runtime.
+      '--header-lines=$#headers' # $#headers will be expanded to lines of headers at runtime
+  )
+zstyle ':fzf-tab:*' command $FZF_TAB_COMMAND
+zstyle ':completion:complete:*:options' sort false
+zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
+zstyle ':fzf-tab:complete:_zlua:*' query-string input
+zstyle ':fzf-tab:complete:*:*' fzf-preview '/home/leon/scripts/preview.sh $realpath'
+
+

zsh/.config/zsh/prompt.zsh

@@ -0,0 +1,48 @@
+#!/usr/bin/env zsh
+
+local __bright_cyan="#8ec07c"
+local __bright_white="#ebdbb2"
+local __bright_green="#b8bb26"
+
+dir() {
+  local CUTOFF=3
+  local IFS=/
+  local my_path=($(print -P '%~'))
+  local p
+  for p in $my_path; do
+    printf %s "${s}${p[0,$CUTOFF]}"
+    local s=/
+  done
+  printf '%s\n' "${p:$CUTOFF}"
+}
+
+
+git_status() {
+  local BRANCH=$(git branch 2> /dev/null | sed -e '/^[^*]/d' -e 's/*\s*\(.*\)/\1/')
+
+  if [ ! -z $BRANCH ]; then
+    echo -n "(%F{$__bright_cyan}$BRANCH%F{$__bright_white}"
+    [ ! -z "$(git status --short)" ] && echo -n "*"
+    echo -n ")%f"
+  fi
+}
+
+function _my_prompt() {
+  local exit_code="$?"
+  echo -n "%F{$__bright_white}╭───"
+  echo -n "%F{$__bright_cyan}$USER"
+  echo -n "%F{$__bright_white} in"
+  echo -n "%F{$__bright_green} $(dir)"
+  echo -n "%F{$__bright_white} $(git_status)"
+  if [ ! "$exit_code" = 0 ]; then
+    echo -n "%F{red} REEEEEEEEEEE $exit_code"
+  fi
+  echo
+  # %3{stuff%} tell's zsh that the characters are printed as 3 chars wide
+  echo -n "%F{$__bright_white}%3{╰─λ%} "
+}
+
+
+setopt prompt_subst
+autoload -U colors && colors
+PS1='$(_my_prompt)'